|
Description
:
Latest improvements in design makes this unit a truly
GMP model and versatile in Operation & Maintenance.
Unit consists of S.S. 304 quality hopper, feed throat
and processing chamber (can be provided in SS 316 quality
at extra cost) with beaters assembly, heavy duty motor,
starter with overload relay, three speed step pulley,
suitable screen, SS cladded base having tabular legs
with castors, optional jacket for the feed throat and
processing chamber for cooling / heating.
|
|
Operation
:
Product kept in the hopper slides
down to the enclosed chamber, where it is milled in between
beaters and screen to the required mesh/micron size which
can be collected at output container.
Quality and output depends upon the three main variables.
-
Beaters
shape (knife / impact forward)
-
Speed
-
Screen size
Application
:
Mill has been specifically designed for wet and dry granulation,
pulverization or dispersion of products or ingredients found
in the Pharmaceutical, Chemical and Food Industries.
It is also find application in the Cosmetics, Confectionery,
Fertilizer, Insecticides, Detergents and Electroflux Industries
etc.
Knife edge for coarse or large particles and impact or flat
edge for finer particles. High speed for grinding, low speed
for coarser particles. A wide range of screens is available
for various process needs.
Salient
Features :
-
GMP
point of view machine is provided with SS cladding on
base, SS belt guards, SS cover on motor & starter.
No exposed painted surface of the machine. Motor rails,
screw and guide rods are chrome plated.
-
Beaters
assembly bearing are in a separate pillow blocks for ease
in maintenance.
-
Very
less down time as only beaters assembly will have to
be reversed (and not the complete chamber) for making
it knife to impact forward or vice-versa which can be
done by single operator.
-
Fixed
beaters assembly is provided as a standard supply which
increases the output by 10 to 30 %, reduces noise level
and is easy to clean as there are no cavities. (If product
demands, swing beaters assembly can be provided.)
-
Beaters
are stainless steel quality and fitted on a splinted shaft.
-
Transmission
of heat to the chamber from the bearings is minimum
as there are away in separated pillow blocks. This facilitates
to some extent in processing of heat sensitive product.
-
Beaters
assembly is dynamically balanced which reduces vibration
and noise level and increases bearing life.
-
Castors
provided for mobility and brakes can be applied for fixing
machine at one place.
-
Machine
is available in Plain & Water Jacketed model.
Screen
:
Perforated as well as Wire mesh screens are available as per
requirement of customers. (S.S.304 or S.S.316 material of
construction). more
details
Clean
Room System
|
