Colloid Mill is suitable for Homogenising, Emulsifying, Dispersing, Mixing, Communiting of liquids to highly viscous products. It is based on rotor - stator principle. It is available in Plain as well as Water Jacketted in both STD. & GMP. models.

Operations :

Product is feed to the operating area of a Rotor, having a speed of 3000 RPM by specially designed feed device. The product is processed by high shear, pressure and friction between the Stator and Rotor, and is also subjected to intense vibration which exert their force on it by means of pressing and releasing actions. Due to the slightly deviating tapering of the milling surfaces to Stator and Rotor, the angular gap becomes narrower towards the discharges section. This processed product continuously leaves the mill through the drain pipe, if required, it can be recirculated.

All contact parts are made out of S.S.304 (S.S.316 on demand at extra charges). No castings are used for avoiding contamination problems. Coupling provided between Motor shaft and Rotor shaft for ease in maintenance.

Three Leak proof neoprene sealing device between the motor and the processing chamber to prevent liquid going in the motor winding. Modified design of semi concave teeth in rotor and stator reduces motor HP and gives better performance in size reduction without damaging the products.

Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or back lash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all around performance and long life of rotor and stator.