This is a
Horizontal Drive & it features a 1 HP, 220 V D.C Drive.
The drive is a very efficient gearbox & it operates in
an oil bath.
The speed is variable and can be varied between 0 to 400 RPM.
This is done via an electronic speed controller and the corresponding
rpm is displayed digitally. The drive also includes a timer
inorder to set time-based operations. All our Multi-Attachments
can be easily mounted and dismounted on the drive with the
help of two quick locking and unlocking knobs.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
This mixer
is designed to be used as a mixing for pastes ointments &
creams. It can also be used for wet powders. This mixer is
provided with a mixing paddle and teflon scrapper which is
shaped in such manner so that there is minimum clearance with
the mixing kettle. The kettle is also easily removable.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
The dry Granulator
consists of two motor driven rollers with teeth. This forces
the material to be granulated with very low proportion of
powder. This is a very sturdy attachment and can be run continuously
for granulating tablets / slugs and pellets.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
The universal
gearing is a basic requirement for our different attachment
like the Coating Pan, Polishing Drum, Pelletizer, Cube Mixer,
etc. The Universal Gearing required when the operating angles
for the above attachments have to be changed. The unit offers
an adjustment of the angle of operation from 0 to 75 degrees.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
This unit
is used for rapid mixing of all types of free flowing powders
and granules. The uniform, multidimensional arrangement of
the mixer walls ensures good mixing. The vessel is manufactured
from stainless steel and secured with threaded knobs. This
unit can be attached to the Universal Gearing.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
This operates
on the reciprocating cam principle. The intensity of the vibration
can be adjusted by changing the speed of the drive unit. The
shaker can be fitted with various sieve sets according to
customer's requirements.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
The coating
pan is used to produce uniform coating on tablets. This can
be used with the universal Gearing and as a result different
tilting angle can be set up to 45 Degree. It is also permits
speed control at any desired RPM. For drying the coated tablets
an infrared radiator is provided at an extra cost.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
The 'V' Blender
is mainly used for mixing of dry power and its provides excellent
results when mixing two different powers. This mixer provides
a unique movement to the powers and thus mixes them very well.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
The cube Mixer
is a based on a movement, which through its tumbling effect
produces in the shortest possible time a homogeneous mixture.
The product to be mixed is treated very gently. The cube Mixer
can be attached to the universal gearing. The housing is manufactured
from stainless steel.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
The polishing
drum consists of felt lined inside of a metal drum for polishing
coated tablets. The bottom of the drum is also lined with
felt. The polishing drum fits with the Universal Gearing exactly
like the coating pan and the cube mixer. The top cover, which
locks quickly in to place with closures.
The cover is fitted with acrylic sheet, which help the observation
of the polishing process while the machine is running.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
The unit is
equipped with a tilting and locking device, which is easy
to operate. This permits adjustment of the infinitely variable
setting of the pan angle, over its whole range. For the cleaning
of the sides as well as the bottom of the pan an adjustable
scraper is provided.
Parts coming in to contact with the material to be processed
are made of polished stainless steel.
The material to be processed is fed manually, or with a metering
device, if a continues is required. The tilted palletizing
pan, which rotates in a clockwise direction, is tilted to
our motor drive.
The material is
brought to practically the highest point of the pan and then rolls
down in the even strim, to the lower half of the pan.
In accordance with the nature of the material the necessary quantity
of liquid to from the pellets is added in certain places. The rolling
movement and the addition of moisture causes pellet form. Due to
the tilted pan and the movement of the material the larger pellets
are carried to the top surface.
The size of the pellets can be influenced by the tilting angle of
the pan by the amount of liquid added and the method, which it is
introduced.
As soon as the pan is full the pellets will continuously roll over
the edge of the pan.
Technical Data:
Model
CPMHMD-10
Dia of the Pan :
400 mm
Dimensions :
45 x 40 x 75 cm.
Net weight :
8 Kgs.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
This Ball
Mill is a very sturdy attachment and mainly used for grinding
crystalline materials and for the mixing of dry materials.
The Ball Mill consists of the transmission drive, stand of
the Ball Mill and the Ball Mill it self. The jar is stainless
steel and contains balls which vary in diameter for 30 to
40 mm. The jar rests on two spindles. One of which is driven
spindle. The jar and balls can be sterilized in a water bath.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
The Mini Ball
Mill is suitable to attach with Universal Gearing. This is
suitable for preparing small samples for analysis or for grinding
or mixing small quantities of power substances. The Mini ball
Mill utilizes 15 mm diameter steel balls and has a total capacity
of 0.5 liters.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
Used in the prepration of oil-in-water
and water-in-oil construction in quantities up in 30 kg /
hour. Homogniser isprodused by a piston pump. Materials may
be fed to the pump either from a hopper, having a capacity
of 1.5 liters.
Or a screw nozzle may be attached with a suction filter, which
sucks the premixed materials from a storage container.
Homogniser takes place by the forward and backward movements
of the piston. A vaccume is created during the backstroke
of the piston, which sucks the liquid back.
During the forward movement of the piston, the liquid is pushed
against the tips of the nozzle. Adjustment of this nozzel
determines the fineness of the homognenization. Homognizer
is equipped with a graduated scale. Hopper, piston and nozzel
are made of stainless steel.
(Electric Voltage as per Country
Standards, customer requirement on demand.)
This unit
is suitable to attached Horizontal Main Drive [HMD 10], hoop
mixer is suitable to research as well as industrial use in
the pharmaceutical, chemical industries, food industries and
plastic industries.
The drive units with drum hoop
support stand assembly.
Acrylic mixing drum with rotating
mechanism.
The drum hoop mixer having drum capacity
of 5 Kg. Operational capacity 3.00 Kg.
Technical Data:
Model
CPMHMD-14
Dimension sizes :
60 x 75 x 60
Net-weight :
5 kg
Gross weight :
15 kg
Packing :
600 x 300 x 300.
(Electric Voltage as per Country
Standards, customer requirement on demand.)
This machine
is suitable for Horizontal Main Drive [HMD 10]. This is an
automatic counting and filling capsules, tablets, coated tablets,
pills and all ball shaped objects with diameter from 5 mm
to 20 mm in to bottles, tins and polybags etc. suitable change
parts can change in a few minutes. Tablets and capsules are
counted with a rotating disc. Output Capacity depends upon
the size of product. Tablets and Capsules range between 1000
to 1500 fills per hour, Coated tablets between 1500 to 1800
per hour. The unit can be supplied as a combination machine
for all type of objects or only for tablets or capsules or
coated tablets. For manufacturering counting interchangeable
discs which can be ordered at any time as a changepart.all
parts coming in to contact with the objects are either made
of stainless steel aluminum anodized or plastic.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
Inside of
the through two z- shaped stirrers rotate towards each other
at different speed.
The special shape of the stirrers and the speed differential
at which they operate shorten substantially the required mixing
time. Stirrers and trough are made of stainless steel. The
unit had a capacity of 3 to 4 kg.
The through can be delivered with a double jacket for colling
or heating with water. The trough is clossed with cover made
of acrylic so that the kheading operation can be watched.
The trough can be tiltedfor emptying or cleaning.
(Electric Voltage as per Country Standards, customer requirement on
demand.)
This machine
is equiped with an oscillating rotor suitable to manufacturer
wet granulates of varius granule sizes. Sieves are easily
exchangable. rotor , sieve and all parts coming in to contect
with the material are constructed of stainless steel.Each
apparatus is supplied with one sieve each of 1.0 and 1.6 mm
mesh size.
The capacity of the machine depands of the material and the
mesh sizes of the sieve and is maximum 25-30 kg per hour.
