|
Would you go for procuring a new set of tools just because
the table finish has become dull? You better not, our polishing
kit would help you in acquiring the original cavity finish
of your punches.
Our kit is specially designed to take care of all sorts of
punch cavities to be polished. We offer shapes of bobs &
nylon brushes to take care of intricate embossing details
on a beveled edge or concave cavities.
We also offer 3 different types of polishing compounds to
cope up with the varying degree of roundness on the punch
cavities.
LIST OF ITEMS IN POLISHING KIT
| QTY |
ITEMS |
| 01 |
COLLET + SCREW |
| 01 |
DIAMOND PASTE : 4/8 GRADE |
| 01 |
EMERY FLOUR |
| 01 |
SUFFIN LUBRICANT |
| 25 |
POLISHING NYLON BRUSH
- WHEEL TYPE |
| 25 |
POLISHING NYLON BRUSH
- CUP TYPE |
| 25 |
POLISHING FELT BOB - CONICAL
FLAT TYPE |
| 25 |
POLISHING FELT BOB - DOME
TYPE |
| 25 |
POLISHING MOTOR WITH SPEED
CONTROLLER |
| 01 |
SPANNER : 14-15 |
| 01 |
SPANNER : 18-19 |
PUNCH POLISHING KIT
The 4 most common errors in punch polishing
A. 'Rounding' of the outside diameter of the tip
B. 'Rounding' of the edge of the tip face
C. Distortion of the tip face
D. Distortion of embossed details.
The Care Required in Polishing Punches :
It is possible to completely spoil the tips, it excessive
or unsatisfactory polishing technique is used. Each punch
tip is machined to a very high degree of accuracy and can
only tolerate very slight wear before producing, excessive
'Flash' or 'Collaring' of tables.
All polishing operations abrade the surface, it is therefore
essential that all polishing is kept to a minimum.
16000 RPM Motor single phase motor with clamp, Nylon brushes.
Felt bobs, Polishing cake, Emery paste, Emery flour etc.
 |
1.CONICAL
FLAT FELT BOB |
 |
2.
DOME FELT BOB |
 |
3.
WHEEL NYLON BRUSH |
 |
4.
CUP NYLON BRUSH |
|
