Description
:
CHAMUNDA'S Automatic ROPP cap sealing machine is a compact
versatile, self supported on stainless steel legs with
height adjustable adjustment system. The machine is
precision built on sturdy welded steel frame completely
enclose in stainless steel sheet and doors are provided
to facilitate the servicing of machine. |
|
Operation
:
The Field containers moving on conveyor belt are fed into
an in feed star wheel (For multi head via an in-feed screw
worm) bringing the container below the sealing head in the
subsequent indexing port mean time the bottle pick up a cap
from the delivery chute of cap feeding bowl. Where the body
and the neck of the container are positioned. The capping
heads rotate along with the main turret and perform the capping
operation. The sealed containers are than fed in to exit side
conveyor
The sealing is done in a programmed roll-on manner. Accurate
positioned of the caps is done mechanically by means of a
rotating un-scrambler, to direct the caps correctly into the
chute. When the chute is filled up the rotating un-scrambler
drive is disengaged. Hence, no damage is done to the caps.
Changing of
the cap size is very easy, enabling even unskilled personnel
to execute the job. The rotating un-scrambler mounted on top
of the closing turret ensures that height adjustment for the
containers is accurate.
Salient
Features :
- "No Container - No
Cap arrangement".
- Single motor syncronises
conveyor, star wheel and platform turret.
- Adjustable height of conveyor
belt.
- All Contact parts are made
out of Stainless steel.
- Sealing pressure can be
varied to suit different gauges and size of caps.
- Specially designed hopper
is provided to increase storage capacity of bowl.
- Low noise level. Low power
consumptions.
- Star wheel is equipped
with safety clutch for automatic stoppage of machine
in case of jamming / over loading.
Note : We reserve the Right
to Change Specification without prior notice.
Technical
Specification :
| Model |
CRCS-60 |
CRCS-150 |
| Out put |
Up to 60/Minutes |
Up to 150/Minutes |
| Electrical Ratting |
1 Hp, 440 Volts, 3 Phase, 50 Hz. |
| ROPP Cap
Diameter |
22 mm to 56 mm, with help of change parts |
| Container |
A) 22 mm to 100 MM (Diameter)
B) 50 mm to 210 (Height) option for other bottle height
available |
| Height
of Conveyor |
750 mm to
840 mm |
|
| Machine
Dimensions in mm |
915 (L) X
610 (W) X 1300 (H) |
2135(L) X
925(W) X 2350 (H) |
| Case Dimensions
in mm |
1000 (L)
X 720 (W) X 1400 (H) |
2250 (L)
X 1050 (W) X 2450 (H) |
| Net Weight
in Kgs. |
300 Kgs.
Approx |
1000 Kgs.
Approx |
| Gross
Weight in Kgs. |
450 Kgs.
Approx |
1250 Kgs.
Approx |
| Change
Parts requirement |
A) Container : Star Wheel, Back Guides
B) Cap size : Pluger, Delivery Chute,
Vibratory Bowl (For Two nearest cap size is common can
use) |
|
