Description : This machine is latest development in Rotary Labelling Machine for BEER Industry and handless different heights and sizes of Beer Bottles/Labels/Aluminium Foils etc. CONMATIC is very robust and sturdy machine with High-Grade Stainless Steel , Vibration free construction. CONMATIC has provision to run four labels, i.e. three at same time Front / Back / Shoulder OR Aluminium Foil or Neck Wraparound. CONMATIC is very efficient machine accurate and perfect labelling.

Salient Features :

• Heavy Duty construction to bear extra load and round the clock operation of machine.
• Pneumatic pumps for both the aggregates for automatic glue feeding and recirculation.
• Clutch to disengage or engage back labelling aggregate as and when required.
• Bottle Change Parts made of UHMW. Thus , low noise and wear/ tear resistant.
• No Bottle-No Glue-No-Coding-No Label.
• Sensors at Infeed to start gluing on Roller & Pallets prior to actual labelling on bottles.
• Proximity sensor with tray at outfeed. Bottle Jamming-Machine Stop.
• Stainless Steel Safely Hood with Acrylic sheets.
• Variable speed controlled with AC frequency Drive.
• Pneumatically controlled Up & Down movement of Foilling Attachment.
• Easy and fast change over from one size to another with additional Change Parts.
• In built Contact Coding attachment with Rubber / Metal / stereos / Letters.
• Automatic controlled Glue scrapper which closes when bottle feed is interrupted.
• Big Label Magazines to accommodate more quantity of labels.
• Machine, Electronic BPM Meter, Counter, Fault Display, Safety Sensors etc. Controlled with PLC fitted in machine .
• Automatic Lubrication pumps for lubrication and circulation of oil in main Rotary Table and Aggregates and also other parts of machine.
• Up & Down movement of Machine by geared motor. Thus, easy adjustment for running different height of bottles.
• Model : 6:4:10 & 6:4:18, i.e., position label pallets, 4 Position Gripper Drum and 10/18 Position Bottle Pads/ Station for Front/Shoulder or Foil Labels Aggregate.
• Labelling Aggregates/Chamber in oil bath. Thus less wear & tear due to permanent lubrication of gears/ cams and other related parts.
• Glue Roller in Stainless Steel and Label Pallets in Rubber to avoid wear & tear of Glue Roller .
• Easy changeover of label size by replacement of shaft with pallets instead of only pallets. Thus, less adjustment and down time

Options :

Ink Jet Printers Instead of Contact Coding Device.

Uitlities :

Power Requirement : 4 H.P., 3-Phase /440V., 50Hz, AC
Air Requirement : 7 cfm at 4.5 kg/cm2
Water Requirement : Minor quantities but regular as per requirement for Foil Labels application only.

Recommendations :

• CONMATIC Transformer of 3-Phase, 6KVA, 415 + 1% for uniform power supply.
• Better Quality / Properly packed Foils and Labels.
• Die cut uniform Labels with proper grain direction.
• Moisture free filtered compressed air.
• Humidity free surroundings.
• Better quality of Glue.